Pore structure and adsorption properties of activated carbon prepared from granular molded waste paper

We have previously manufactured activated carbon using waste paper board, which was prepared by adding 8% phenol resin adhesive to torn waste newspaper and hot-pressing. In this study, the pretreatment process of the raw material was simplified; the waste paper was extruded to form granules. The activated carbon was manufactured by the carbon dioxide activation method using the granules as the raw material. The properties of the activated carbon were evaluated based on the pore structure, the iodine adsorption number, and the adsorption of toluene vapor in a sealed chamber. The activated carbon, which was manufactured at an activation temperature of 1100°C and a treatment time of 60min, exhibited a specific surface area of 1241m²/g and an iodine adsorption number of 1120mg/g. These results were similar to those obtained for two commercially available activated carbons. The extent of toluene vapor adsorption by this activated carbon was similar to that observed for the two commercial activated carbons over a period of 130min.     

Health risk assessment of PCDD/F emissions from a hazardous and medical waste incinerator in Turkey

A multimedia risk assessment procedure was conducted to determine the fate and transport of polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran (PCDD/F) emissions from the Izmit Hazardous and Medical Waste Incinerator (IZAYDAS) in Turkey and their potential health risks. Congener concentrations in ambient air and their deposition rates were determined by an air dispersion model (ISCST3). Their transfer to some plant groups and animal tissues was predicted by food chain modeling. Exposure scenarios were produced based on three receptor groups (urban, semiurban, and rural) and five subgroups determined according to ages. Daily intakes of PCDD/Fs via exposure pathways were determined based on three different emission scenarios for each group and subgroup. Estimated incremental PCDD/F doses caused by the incinerator emissions in central-tendency scenario were computed as between 2.31 x 10(-6) and 0.008 pg TEQ kg(-1) bodyweight (bw) day(-1) on average for all the receptors other than infants in all the settings, while the range was 3.01 x 10(-5)-0.081 pg TEQ kg(-1) bw day(-1) for infants. Sensitivity analysis showed that the consumption of vegetal products and their locally grown fractions are the most significant parameters in the exposure to PCDD/Fs in the area.     

A research on dioxin generation from the industrial waste incineration

By using fluidized-bed furnace and rotary-kiln+stoker furnace and four different kinds of industrial wastes such as waste wood, coffee mill, waste oils and waste plastics, we have drawn the following conclusions:

(1) A relationship between H6CBz and DXN is acquired, which is DXN=0.34×H6CBz^1.1.

(2) The following means of emission reduction can be considered. (a) Reduction of DXN and Cl accumulation within the furnace, (b) control by the incinerated object, (c) control through the precursors of H6CBz, (d) improvement through operational control, (e) ammonia injection into the high-temperature zone of the furnace seems to be effective in reducing DXN and (f) DXN concentration is high with CO above 1800 ppm, though it decreases with CO below ≈10 ppm.     

头盔式面罩和头带式面罩主要性能的比较研究

头盔式面罩和头带式面罩性能的比较：头盔式面罩具有佩戴容易、气密性好。工艺简单，但舒适性差，视野不如头带式面罩好等特点；头带式面罩具有舒适性好，视野宽阔，但工艺较复杂，佩戴不易气密等特点。     

安钢6#高炉煤气净化系统的改造

把安钢6#高炉煤气净化系统中的内滤式大布袋形式改造为小布袋低压氮气脉冲形式,增加了布袋的过滤面积,改变滤料性能,增加滤料的过滤负荷,延长布袋使用寿命,改善了煤气质量,取得了良好的经济效益和社会环保效益.     

转炉煤气净化回收技术发展现状

介绍了氧气转炉煤气的干法和湿法净化回收技术的发展现状,着重二者的技术经济比较,阐述干法(LT法)的发展优势.     

煤气负压管道裂纹的修补

介绍了河南天宏焦化公司采用可赛新金属修补系列产品,对煤气负压管道裂纹进行修补,取得了良好效果,避免了煤气负压管道普通焊补作业的危险性和停机检修对生产造成的诸多不利因素,实现了煤气负压管道补漏作业的安全高效.同时,对可赛新金属修补系列产品的技术性能作了介绍.     

某天然气净化厂污水处理装置改造可行性研究

通过多次的现场调研、收集资料和水质监测,分析了引进天然气净化厂生产的产污环节,现有的污水处理装置的有关设计图纸及污水处理的运行情况.在此基础上,采用理论分析与实际问题相结合的方式,针对现有污水处理过程中的不足,提出了该厂的污水处置适应性改造的可行性研究.     

煤气管道带气抽堵盲板、开孔接管中的安全技术

生产或使用煤气的工业企业常常需要带气抽堵盲板和开孔接管作业。此类特殊作业存在中毒、着火、爆炸的危险性，为了安全、高效地实施此类作业，本文结合企业15年安全作业的实践，系统地总结了作业的方案制定、主要准备工作、作业过程的控制等方面措施和内容，并总结了相关安全技术问题的一些做法和体会。     

抽出式通风煤巷掘进过程中粉尘浓度分布规律的数值模拟

根据气固两相流理论，针对矿井掘进工作面的特点，采用计算流体力学的离散相模型（DPM）对掘进工作面通风过程中粉尘浓度进行数值模拟，总结抽出式通风掘进巷道中粉尘浓度的沿程分布及变化规律。